Related Information
&
“Turning the Power On and Off” on page 16
Control panel gets dark
The printer is in sleep mode. Tap anywhere on the touch screen to turn on the display.
Slight Electric Shock when Touching the Pinter
If many peripherals are connected to the computer, you may feel a slight electric shock when touching the printer.
Install a ground wire to the computer that is connected to the printer.
Operations Sounds Are Loud
If operations sounds are too loud, enable Quiet Mode.
Settings
-
General Settings
-
Printer Settings
-
Quiet Mode
Related Information
&
“Menu Options for Printer Settings in General Settings” on page 38
The Date and Time Are Incorrect
Set the date and time correctly on the control panel. After a power failure caused by a lightning strike or if the
power is left off for a long time, the clock may show the wrong time.
Related Information
&
“Menu Options for Basic Settings in General Settings” on page 36
External memory is not recognized
Settings
>
General Settings
>
Printer Settings
>
Memory Device
to enable the memory device interface.
Related Information
&
“Menu Options for Printer Settings in General Settings” on page 38
Cannot save data in the external memory
❏
Make sure that external memory is not write protected.
❏
Make sure that there is enough space in the external memory. It cannot be saved if the remaining space is small.
User's Guide
Solving Problems
177