Error Code on the Status Menu
If a job does not complete successfully, check the error code displayed on the history of each job. You can check the
error code by pressing the
button, and then tapping
Job Status
. See the following table to find the problem and
its solution.
Code
Problem
Solution
001
The product was turned off by a power failure.
-
101
The memory is full.
Try the methods below to reduce the size of the print
job.
❏
Lower the print quality and the resolution.
❏
Change the format setting.
❏
Reduce the number of images, letters or fonts
used in the print job.
102
Collated printing has failed due to a lack of available
memory.
Try the methods below to reduce the size of the print
job. If you do not want to use these methods, try
printing one copy at a time.
❏
Lower the print quality and the resolution.
❏
Change the format setting.
❏
Reduce the number of images, letters or fonts
used in the print job.
103
Printing quality has been lowered due to a lack of
available memory.
If you do not want to lower the print quality, try the
following methods to reduce the size of the print job.
❏
Change the format setting.
❏
Reduce the number of images, letters or fonts
used in the print job.
104
Reverse printing has failed due to a lack of available
memory.
If you want to print in reverse, try the following
methods to reduce the size of the print job.
❏
Lower the print quality and the resolution.
❏
Change the format setting.
❏
Reduce the number of images, letters or fonts
used in the print job.
106
Cannot print from the computer due to the access
control settings.
Contact your printer administrator.
107
User authentication failed. The job has been
canceled.
❏
Make sure that the user name and password are
correct.
❏
Tap
Settings
>
General Settings
>
System
Administration
>
Security Settings
>
Access
Control
. Enable the user restriction function, and
then allow the job without an authentication
information.
108
Confidential job data was deleted when the printer
was turned off.
-
110
The job was printed on one side only because the
paper loaded does not support double sided
printing.
If you want to perform 2-sided printing, load paper
that supports 2-sided printing.
User's Guide
Solving Problems
156