&
“Sending Faxes Manually After Confirming the Recipient's Status” on page 137
&
“Removing Jammed Paper” on page 202
Sent Fax Quality Is Poor
❏
Clean the scanner glass.
❏
Clean the ADF.
❏
Change the
Original Type
setting on the control panel. If your originals contain both text and photos, select
Photo
.
❏
Change the
Density
setting on the control panel.
❏
If you are not sure about the capabilities of the recipient fax machine, enable the
Direct Send
feature or select
Fine
as the
Resolution
setting.
If you select
Super Fine
or
Ultra Fine
for a monochrome fax, and send the fax without using the
Direct Send
feature, the printer may automatically lower the resolution.
❏
Enable the
ECM
setting on the control panel.
Related Information
&
&
“Cleaning the Scanner Glass” on page 179
&
“Cleaning the ADF” on page 177
Faxes Are Sent at the Wrong Size
❏
When sending a fax using the scanner glass, place the original correctly aligning its corner with the origin mark.
Select your original size on the control panel.
❏
Clean the scanner glass and the document cover. If there is dust or stains on the glass, the scanning area may
extend to include the dust or stains, resulting in the wrong scanning position or small images.
Related Information
&
&
“Placing Originals” on page 36
&
“Cleaning the Scanner Glass” on page 179
Received Fax Quality Is Poor
❏
Enable the
ECM
setting on the control panel.
❏
Contact the sender and ask them to send using a higher quality mode.
❏
Reprint the received fax. Select
Log
from
Job/Status
to reprint the fax.
Related Information
&
“Checking the Fax Job History” on page 159
User's Guide
Solving Problems
232