Setting the Paper Size for Each Source - Windows
Parent topic:
Setting the Paper Size for Each Source - Control Panel
You can change the default paper size for each source using the control panel on the product.
1.
Press the
Setup
button.
2.
Select
Printer Setup
and press the
OK
button.
3.
Select
Paper Size Loaded
and press the
OK
button.
You see this screen:
4.
Select the paper source you want to change and press the
OK
button.
5.
Select the paper size you loaded and press the
OK
button.
Note:
The
Others
setting is recommended for the rear tray, so that you can select the size when
printing.
6.
Select
Paper Size Notice
and press the
OK
button.
7.
Select
Yes
if you want the printer to prevent you from printing with the wrong paper size settings.
Note:
If you choose
No
and you try to print with the wrong settings, the printer will print even if the
image size exceeds the printable area, and your printout may be smudged.
40
Summary of Contents for WF-B4533
