Epson WF-B4533 User Manual Download Page 222

Page: 222 / 232

LCD Screen Safety Instructions
Wireless Connection Safety Instructions
Telephone Equipment Safety Instructions

Parent topic:

Notices

Ink Pack Safety Instructions

• Keep ink packs out of the reach of children and do not drink the ink.

• Be careful when you handle used ink packs; there may be ink remaining around the ink supply port. If

ink gets on your skin, wash it off with soap and water. If it gets in your eyes, flush them immediately
with water.

• Do not put your hand inside the product or touch any packs during printing.

• Install a new ink pack immediately after removing an expended one. Leaving packs uninstalled can

dry out the print head and may prevent the product from printing.

• Do not remove or tear the label on the pack; this can cause leakage.

• Do not shake packs after opening their packages; this can cause them to leak.

• Use an ink pack before the date printed on its package.

• Do not dismantle an ink pack. This could damage the print head.

• Store ink packs in a cool, dark place.

• After bringing an ink pack inside from a cold storage site, allow it to warm up at room temperature for

at least three hours before using it.

Parent topic:

General Product Safety Instructions

LCD Screen Safety Instructions

• Use only a dry, soft cloth to clean the LCD screen. Do not use liquid or chemical cleansers.

• If the LCD screen is damaged, contact Epson. If the liquid crystal solution gets on your hands, wash

them thoroughly with soap and water. If the liquid crystal solution gets into your eyes, flush them
immediately with water. If discomfort or vision problems remain after a thorough flushing, see a doctor
immediately.

Parent topic:

General Product Safety Instructions

222

Summary of Contents for WF-B4533









































































































































































































































Search results

Summary of Contents for WF-B4533

Reviews:

Brands by name

Popular brands

Epson WF-B4533, User Manual

Search results

Summary of Contents for WF-B4533

Reviews:

Brands by name

Popular brands