5.
Moisten a cotton swab with the water with a few drops of detergent so that it is not dripping water, and then
wipe the smeared part.
Be careful not to touch the ink that has adhered inside the printer.
c
Important:
Wipe off the smear gently. If you press the cotton swab too hard to the film, the springs of the film may be
dislocated and the printer may be damaged.
6.
Use a new dry cotton swab to wipe the film.
c
Important:
Do not leave any fibers on the film.
Note:
To prevent the smear from spreading, frequently replace the cotton swab with a new one.
7.
Repeat steps 5 and 6 until the film is not smeared.
8.
Visually check that the film is not smeared.
9.
Close the scanner unit.
>
Improving Print, Copy, Scan, and Fax Quality
>
115
Summary of Contents for WF-2960
Page 17: ...Part Names and Functions Front 18 Inside 19 Rear 20 ...
Page 25: ...Loading Paper Paper Handling Precautions 26 Paper Size and Type Settings 26 Loading Papers 28 ...
Page 31: ...Placing Originals Placing Originals 32 Originals that are not Supported by the ADF 33 ...
Page 239: ...Where to Get Help Technical Support Web Site 240 Contacting Epson Support 240 ...