Epson TM-L60 Operator'S Manual Download Page 3 | Manualshive

Page: 3 / 79

background image

CC CLASS A

FCC COMPLIANCE STATEMENT FOR AMERICAN USERS

This equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference, in
which case the user will be required to correct the interference at his own

expense.

WARNING

The connection of a non-shielded printer interface cable to this printer will

invalidate the FCC Verification of this device and may cause interference
levels which exceed the limits established by the FCC for this equipment.

You are cautioned that changes or modifications not expressly approved by
the party responsible for compliance could void your authority to operate the
equipment.

FOR CANADIAN USERS

This digital apparatus does not exceed the Class A limits for radio noise
emissions from digital apparatus as set out in the radio interference regula-
tions of the Canadian Department of Communications.

Le present appareil numérique n’émet pas de bruits radioélectriques de-
passant les limites applicables aux appareils numériques de Class A pre-
scrites dans le règlement sur le brouillage radioélectrique édicté par le Min-

stère des Communications du Canada.

«
1
2
3
4
5
...
»

Summary of Contents for TM-L60
















































































Reviews:

No comments

Related manuals for TM-L60

Brand: Hamlet Pages: 58

Brand: Auta Pages: 10

Brand: M3 Mobile Pages: 45

Brand: EVROMEDIA Pages: 64

Brand: HID Pages: 2

Brand: Honeywell Pages: 32

Brand: Honeywell Pages: 32

Brand: Honeywell Pages: 48

Brand: Honeywell Pages: 76

Accentic 026422

Brand: Honeywell Pages: 36

Brand: Honeywell Pages: 112

Brand: Honeywell Pages: 83

Dolphin 9700-MSCR

Brand: Honeywell Pages: 2

Brand: Atid Pages: 32

Brand: Unitech Pages: 56

Brand: Bluebird Pages: 45

Brand: BBPOS Pages: 2

Brand: Nordic ID Pages: 19

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands