Epson Stylus Pro 7600 Photographic Dye Ink, Service Manual

Page: 61 / 322

EPSON Stylus Pro 7600/9600 Revision A
Product Description Operating Panel 61
Note 1: Paper thickness is saved to adjust with 0.1mm unit for paper thickness setting command
PH.
2: Paper thickness is firstly entered to reduce operation with the closest pattern print of
adjustment value saved in the printer.
3: Select "STD" when authentic EPSON dedicated paper is to be used. Then the paper
thickness sensors detect the paper thickness and make automatic setting.
(Thin paper = 0.2mm / Thick paper = 1.2mm)
4: When the following paper is to be used, select [0S] or [3S].
[0S] = Films and special thin paper
[3S] = Recommended thick RC paper for borderless printing
5: When any paper other than authentic EPSON dedicated paper is to be used, set paper
thickness in increments of 0.1 mm.
Note *1: Adjustment values calculated with PG1.2mm for PG 0.7mm, 2.2mm, 2.6mm are
saved except adjustment value saved for PG 1.2mm at that time.
*2: In this case, adjustment value is saved into PG0.7mm area as a special setting for
film media (paper thickness 0.15mm). This is used when special setting for film
media (00h) is set with PH command.
*3: In this case, adjustment value is saved into PG0.7mm area as a special setting for
glossy media (paper thickness 0.3mm). This is used when glossy media is specified
with paper adjustment value of paper feed adjustment setting command.
*4: Even when paper thickness sensor detects thin paper (less than 0.7mm), PG is set as
2.6mm if paper thickness setting is more than 0.7mm.
*5: When paper thickness sensor detects thick paper (more than 0.7mm), PG is set as
2.6mm regardless of PG setting and paper thickness setting.
*6: It is saved into saving place for paper thickness 0.0mm.
*7: It is saved into saving place for paper thickness 0.3mm.
Table 1-44.
Paper thickness sensor
Paper thickness
setting
PG setting Saving place Notes
Less than 0.7mm STD - For PG1.2mm *1
More than 0.7mm - PG2.6mm
Less than 0.3mm 0S - For film media
(PG0.7mm) *2
More than 0.3mm *6
Less than 0.3mm 3S - For glossy media
(PG0.7mm) *3
More than 0.3mm *7
Less than 0.3mm 0.0mm Narrow For PG0.7mm
Standard For PG0.7mm
Wide For PG1.2mm
Wider For PG2.2mm
0.1~0.6mm Narrow For PG0.7mm
Standard For PG1.2mm
Wide For PG2.2mm
Wider For PG2.6mm
0.7~1.6mm - For PG2.6mm *4
More than 0.3mm
Less than 0.7mm 0.0~0.6mm Narrow For PG1.2mm
Standard For PG1.2mm
Wide For PG2.2mm
Wider For PG2.6mm
0.7~1.6mm - For PG2.6mm *4
More than 0.7mm 0S/3S/
0.0~1.6mm - For PG2.6mm *5