Epson Stylus Pro 5000 Reference Manual Download Page 61

Page: 61 / 233

3. Align the right edge of the paper with the right edge guide

and load the paper printable side down in the feed slot
until it meets resistance.

4. The printer automatically feeds the paper, and the printer

starts printing when you send a print job from the
computer.

When the printer finishes printing, it ejects the sheet. If the
sheet does not eject completely, press the

Eject

button.

Loading in the rear manual feed slot

Follow the tips below when loading paper in the rear feed slot.

❑

You can load one sheet at a time.

❑

Load paper printable side up.

The following procedure describes how to load paper in the
rear feed slot.

1. Make sure the printer is turned on.

2. If you are loading a sheet of paper longer than A4 size, extend

the paper tray extension and paper tray cover extension.

kh-16

Keywest Ref. Guide
Rev.c

A5 size

Chapter 2

10-14-97

DR, pass 1

Paper Handling

2-21

Summary of Contents for Stylus Pro 5000










































































































































































































































Search results

Summary of Contents for Stylus Pro 5000

Reviews:

Epson Stylus Pro 5000, Reference Manual, Page: 61 / 233

Search results

Summary of Contents for Stylus Pro 5000

Reviews: