Epson Stylus Pro 5000 Reference Manual Download Page 164

Page: 164 / 233

Power supply

The lights come on briefly but then go off and stay off.

Cause

What to do

The printer’s voltage rating
may not match the voltage of
your electrical outlet.

Check the printer and outlet voltage
ratings. If the voltages do not match,
unplug the printer immediately and
contact your dealer.

Warning:

Do not reconnect the power cord to an
electrical outlet that does not have
matching voltage.

The printer does not work and the control panel lights are off.

Cause

What to do

The printer is turned off.

Press the

Operate

button.

The

Operate light will come on.

The power cord is not
properly plugged into the
electrical outlet.

Turn off the printer, make sure the
power cord is firmly plugged into the
electrical outlet, and turn the printer
back on.

The electrical outlet is
controlled by an outside
switch or automatic timer.

Use a different outlet.

The electric outlet is out of
order.

Plug another electrical device into the
outlet to determine whether the outlet
is working. If it is not, use a different
outlet.

Keywest Ref. Guide
Rev.c

A5 size

Chapter 8

10-09-97

DR, pass 0

8-10

Troubleshooting

Summary of Contents for Stylus Pro 5000










































































































































































































































Search results

Summary of Contents for Stylus Pro 5000

Reviews:

Epson Stylus Pro 5000, Reference Manual, Page: 164 / 233

Search results

Summary of Contents for Stylus Pro 5000

Reviews: