Epson Stylus Pro 5000, Reference Manual, Page: 151 / 233

Transporting the Printer
If you need to transport your printer some distance, carefully
repack it using the original box and packing materials as follows:
1. Turn on the printer.
2. Remove any paper in the printer and in the paper tray. Press
the Eject button to eject any paper that has been fed into
the printer.
3. Turn off the printer and make sure the print heads are in
the home (far right) position. If they are not, turn the
printer back on, wait until they stop moving and are in the
home position; then turn off the printer.
Note:
After turning off the printer, the Operate light may flash for a
while. Do not unplug the power cord until the light goes off.
4. Remove all four of the ink cartridges and store them in
separate plastic bags. Close the ink cartridge clamps and
compartment covers.
Note:
If you only need to transport your printer a short distance, do
not remove the ink cartridges.
k-42
7
M
a
int
e
na
nc
e
R
Keywest Ref. Guide
Rev.c
A5 size Chapter 7
10-09-97 DR, pass 0
Maintenance and Transportation 7-7