Epson Stylus Pro 5000, Reference Manual, Page: 34 / 233

Printing on Ink Jet Back Light Film and Photo
Quality Self Adhesive Sheets
When printing on Ink Jet Back Light Film or Photo Quality Self
Adhesive Sheets, please follow the instructions below:
1. See the table below, and determine the most appropriate
paper path. Then load film or adhesive sheets according to
the instructions in Chapter 2, “Paper Handling.”
Paper path Printable side Remarks
Paper tray Unavailable You cannot load Back
Light Film or Photo
Quality Self Adhesive
Sheet in the paper trays.
Lower paper tray
Front manual feed slot Down You can load one
sheet at a time.
Rear manual feed slot Up
Note:
❑
The paper sizes you can load and the direction you load the
paper varies depending on the paper path. See page 2-3 for
details.
❑
EPSON Ink Jet Back Light Film tends to curl even under
normal storage conditions. If it curls, flatten it before you
load the film.
2. Open the document you want to print, and click Print or
Page Setup on the File menu. Click Options , Properties ,
Printer , Setup , or a combination of these buttons to open
the printer driver. For detailed information on opening the
printer driver and making printer driver settings, see
Chapter 3 (Windows) or Chapter 4 (Macintosh).
3. Select the paper path you use from the Paper Source list on
the Paper menu you use for Windows or in the Page Setup
dialog box for Macintosh.
L
Keywest Ref. Guide
Rev.c
A5 size Chapter 1
10-09-97 DR, pass 0
1-16 Printing on Various Kinds of Paper