Troubleshooting
Page 171
The Status Monitor 2 window doesn’t appear (Windows)
Possible cause
Solution
Status Monitor 2 is
not available in
Windows 3.1
Upgrade to Windows 95 or Windows 98.
You didn’t restart
your computer after
installing Status
Monitor 2.
Click Start, select Shut Down, click Restart the computer, and click
Yes to restart your computer. Then try using Status Monitor 2.
Bi-directional support
is not enabled.
Follow these steps to enable bi-directional support:
1 Make sure your printer is connected to your computer with a
bi-directional cable.
2 Then click Start, select Settings, and click Printers.
3 Right-click the EPSON Stylus COLOR 900 icon and select
Properties.
4 Click the Details tab, then click the Spool Settings button.
5 Click the
Enable bi-directional support for this printer radio button
to turn on bi-directional support.
6 Click OK twice, then close the Printers window and try printing again.
You’re using
ScanDisk.
Before using ScanDisk, turn off background monitoring in Status
Monitor 2. (See
Turning On Background Monitoring
for instructions.)
Then turn it back on when you’re finished using ScanDisk.
color900.book Page 171 Wednesday, January 6, 1999 12:39 PM