51
Appendix A:
Configuration Settings
The Wireless Server Configuration screen includes both fields that display
information and fields that allow you to modify print server settings. Since most of
the settings are configured automatically based on your existing network, you don’t
need to change these settings for the typical wireless network. Some settings, such as
the Server Name or Password, you may want to change for convenience or security.
If you contact EPSON for technical support, you need to provide configuration
information such as the serial number and firmware revision.
Following are definitions of the configuration settings:
Server Name
Name that identifies the print server (and its printer) on your wireless network. The
default is
EAI_xxxxxx
(where
xxxxxx
are the last six digits of the MAC/Ethernet
address). Choose any name that makes it easier for users to identify the printer (for
example,
Admissions Printer
). You can enter from one to 32 characters in this field.
Make sure you follow the naming practices for your organization.
Serial Number
Unique number that identifies each EpsonNet 802.11b Wireless Print Server that is
produced. This number is set during manufacture and cannot be changed.
Password
Used to restrict access to the Wireless Server Configuration screen. The default
password is null (blank). The maximum number of characters you can use in this
field is 16.
Firmware Revision
Indicates the version of the software embedded in the print server. This field cannot
be changed.
