Setting Up Your Printer
15
8. To test the connection between the print server and
printer, press the test button for one second and
release it.
■
If the print server status page prints, you’re ready to install the software and
configure your system for wireless printing. See the next section for
instructions.
■
If the status page doesn’t print, make sure the printer is ready and is not out of
ink or paper. (See page 13 for instructions on testing the printer.) Then turn
off the printer, unplug the print server, and check the cable connections at
both ends. Plug the server back in, turn on the printer, and press the test
button again. If the test page still doesn’t print, contact EPSON as described
on page 50.
If you hold the test button down, you
may reset the print server. If you do
this, wait for the print server’s lights to
go out, then press the button again
and release it immediately to print the
status page.