Setting Up Your Printer
13
Running a Printer Check
Before you connect the printer, print a test page to make sure the printer is working
properly. Make sure letter-size or larger paper is loaded in the printer.
1. Press the
P
power button to turn off the printer.
2. Hold down the
m
paper button as you press and release the
P
power button.
3. Continue holding down the
m
paper button until the
P
power light starts
flashing, then release it.
The printer prints a sheet showing its ROM version number, ink counter, and a
nozzle check pattern. If the test page prints, continue with the instructions below for
connecting the print server.
If the test page doesn’t print, check the control panel lights. See the “Problem
Solving” chapter in the
Printer
Basics
book for control panel guidelines. If none of the
solutions work, contact EPSON as described on page 50.
Connecting the Print Server
Once the printer is set up and has ink and paper, you’re ready to connect the print
server.
1. Press the
P
power button to turn off the printer.
2. Slide the print server into the base and press firmly to
attach it.