Epson SC-S40600 Series User Manual Download Page 47

Page: 47 / 157

Use the

button to select

Easy Media

Setup

, and then press the

button.

Use the

buttons to select the desired media

number, and press the

button.

If a number with the saved settings is selected, the
existing settings are overwritten.

The setting name is registered.

Name the media setting bank. Using distinctive
names makes it easier to select banks for use.

Use the

buttons to display letters and

symbols. When the desired character is
displayed, press the

button to select the next

entry position.

Mistakes can be erased by pressing the

button

to delete the previous character and move the
cursor back one spot.

After entering the name, press the

button.

Use the

buttons to select the media type that

matches the loaded media, and then press the

button.

When

Adhesive Vinyl

Banner

is selected, go

to step 8.

When you select anything except for

Adhesive

Vinyl

and

Banner

, printing starts for the media

adjustment pattern. Go to step 9.

Use the

buttons to select Auto/Manual for

Media Adjust, and then press the

button.

When executing

Auto

: An adjustment pattern is

printed. When auto adjustment is complete, Easy
Media Setup is complete and you are returned to
the status display screen.

When executing

Manual

: An adjustment pattern

is printed. When printing is complete, the
adjustment value entry screen is displayed.
Continue to the next procedure.

Check the printed adjustment pattern.

When anything except for Textile is selected

Two groups of adjustment patterns, A and B, are
printed. Select the pattern with the least amount
of overlapping or gaps for each group. Select "0.0"
in the cases shown below.

If there are patterns where the overlapping or
gaps are the same, enter the middle value in step
10. Enter "-0.05%" in the cases shown below.

If all of the adjustment patterns contain
overlapping or gaps, select the pattern with the
least overlaps or gaps.

In this situation, follow the steps below to
complete Easy Media Setup, and then perform

500mm Pattern

for media feed adjustment.

“Feed Adjustment” on page 49

When Textile is selected:

A 500 mm pattern is printed.

Measure using a scale of up to 0.5 mm.

SC-S80600 Series/SC-S80600L Series/SC-S60600 Series/SC-S60600L Series/SC-S40600 Series User's Guide

Basic Operations

Summary of Contents for SC-S40600 Series






























































































































































Search results

Summary of Contents for SC-S40600 Series

Reviews:

Epson SC-S40600 Series, User Manual, Page: 47 / 157

Search results

Summary of Contents for SC-S40600 Series

Reviews: