E
Move the roll holder to the set position according
to the roll size of the media that will be loaded.
F
Tighten the screw until the screw no longer turns.
G
Note:
The method of placing the roll media varies as
follows depending on how media is rolled.
Printable Side Out
Printable Side In
H
I
Firmly insert the roll core of the media onto the
roll holder.
Note:
If the roll of media has an outer diameter which is
less than 140 mm, the roll core will not reach the
holder when raised using the lift lever.
Raise it with your hands, and insert the roll core
onto the roll holder.
SC-S80600 Series/SC-S80600L Series/SC-S60600 Series/SC-S60600L Series/SC-S40600 Series User's Guide
Basic Operations
32
