Epson SC-S30600, User Manual

Page: 74 / 110

Details of the Menu
The Media Setup Menu
The Media Setup menu can be accessed directly by pressing the
M
button.
indicates default settings.
Media Remaining
Item Parameter Explanation
Remaining Setup On
Choose
On
to display and record, or
Off
to not display and not record, the
amount of media remaining. Length , Remaining Alert , and Print
Remaining Length options are available when On is selected. The display
panel shows the amount of media remaining based on the value selected
for
Length and the amount of media used during printing.
Off
Length 5.0 to 99.5 m (15 to
300 ft) Enter a value for overall roll length between 5.0 and 99.5 m (15 to 300 ft).
You can set in 0.5m (1ft) increments.
Remaining Alert 1 to 15 m (4 to 50 ft) An alert will be displayed if the amount of media remaining reaches this
length. Choose from values between 1 and 15 m (4 and 50 ft). You can set in
0.5m (1ft) increments.
Print Remaining Length Print Use Print Remaining Length to print the amount of media remaining on
the current roll before replacing it with another type of media. You can
then enter this number as the media the length the next time the roll is
used.
Select Media
Parameter Explanation
RIP Settings Choose the media settings used for printing.
If RIP Settings is selected, the media settings selected in the software RIP
will be used.
Select a number between 1 and 30 to use the settings in the
corresponding media setting bank. Use
Customize Settings to create
media setting banks.
1 to 30 (media setting bank number)
Customize Settings
Item Parameter Explanation
Current Settings Change settings for currently selected media. The options available
depend on whether
RIP Settings or a media setting bank is selected. More
information on the options available can be found below in the entries for
RIP Settings and media setting banks 1 to 30.
SC-S30600 Series User's Guide
Using the Control Panel Menu
74