I
When
C1
is displayed in the control panel, use
the
d
/
u
buttons to select the number recorded in
Step 8 and press the
Z
button.
J
Select a pattern number for each color, from
C1
to
BK2
, and press the
Z
button.
K
The media setup menu will be displayed when
you enter the pattern number for the last color.
Feed Adjustment (Manual
Feed Adjustment)
Feed Adjustment
is used to correct banding (horizontal
banding, lines, or strips of uneven color).
Feed Adjustment can be performed automatically or
manually.
For more information on automatic feed adjustment,
see
U
This section explains how to perform manual feed
adjustment.
Two methods are available:
❏
Visually inspect print results and enter a correction
by hand.
❏
Enter a correction during printing and inspect the
results.
Note:
Feed Adjustment
varies with the media used. Load the
media for which feed adjustment is required under the
same conditions as the actual print job. For example, if
you are using the auto take-up reel unit for printing, the
auto take-up reel unit should also be used for feed
adjustment.
Furthermore, when installing the heavy roll media
system, the media must be loaded and feed adjustment
performed again, even if once you adjust with the
standard roll media system.
Adjust the feed manually if you feel that auto feed
adjustment has not completely resolved the problem.
Using a Test Pattern
Primary
and
Secondary
adjustments are required.
Normally the
Secondary
adjustment is performed after
the
Primary
adjustment.
Primary
adjustment alone
may be sufficient if you only wish to accurately print the
length of a design.
Buttons that are used in the following settings
A
After confirming that the printer is ready to
print, press the
Menu
button.
The settings menu will be displayed.
B
Select
Media Setup
and press the
Z
button.
C
Use the
d
/
u
buttons to select
Customize
Settings
and press the
Z
button.
D
Use the
d
/
u
buttons to select a media setting
bank number between 1 and 30 and then press
the
Z
button.
Note that any settings already saved in the printer
will be overwritten.
E
Use the
d
/
u
buttons to select
Feed Adjustment
and press the
Z
button.
F
Select
Manual
and press the
Z
button.
Primary Adjustment
SC-S30600 Series User's Guide
Basic Operations
47
