Attaching the Roll Core
A
After confirming that the media is loaded
correctly, press the
d
button to feed the media as
far as the auto take-up reel unit roll core holder.
B
Loosen the roll core holder fixing screws and
adjust the roll core holders so that the gap
between the two is wider than the media.
Center the roll supports between the roll holders.
C
Align the right roll core holder with the right
edge of the media and tighten the fixing screw.
D
Insert the roll core onto the right holder.
E
Insert the left holder into the roll core.
Slide the holder in until part A in the illustration
below is fully inserted.
c
Important:
Stop when part A is no longer visible. The
take-up reel unit may not function as
expected if the holder is inserted too far.
SC-S30600 Series User's Guide
Basic Operations
36
