A
Use a cleaning stick to wipe the areas of the print
head shown in the illustration.
c
Important:
Be sure to use a narrow cleaning stick to clean
between the nozzles (the four areas shown in
the illustration). Touching the nozzle surface
with the cleaning stick could damage the print
head.
B
Ink spatters on the base of the print head can be
removed using an extremely small amount of ink
cleaner applied to a clean room swab (available in
the market).
c
Important:
❏
Be sure not to touch the nozzle surface
during cleaning. Failure to observe this
precaution could damage the print head.
❏
The parts shown below are sensors. Be
careful not to touch this area with your
hands or clean room swabs. Failure to
observe this precaution could affect print
quality.
Cleaning Wiper and Caps
A
Clean the front and back of the wiper with a
cleaning stick.
If the attachment points do not require cleaning,
clean the wiper as shown below and proceed to
Step 7.
SC-S30600 Series User's Guide
Maintenance
56
