F
While aligning the right edge of the paper with
the guide on the right-hand side of the tray, slide
the paper all the way into the printer, and pull
back the paper until the leading edge touches the
tray.
G
Press
Load
on the control panel screen.
The paper will be fed into the printer.
Note:
If you are returned to the home screen, select
Load
Guide
, and then follow the on-screen instructions.
H
Fully extend the output tray.
Extend the tray until you can see the line on the
left-hand side of the first section of the tray.
When the paper is loaded correctly, the Paper
Setup screen is displayed.
U
“Displaying the Paper Setup Screen” on
Note:
To eject the paper, press
Eject
on the control panel's
Home screen, and then follow the on-screen
instructions.
Ejecting paper after printing
Poster board is not ejected automatically after printing
to prevent it from falling to the floor.
Follow the on-screen instructions, and while
supporting the paper with your hand, press
Eject
.
SC-P800 Series User’s Guide
Basic Operations
29