manualshive.com logo in svg

Epson S1D13706, Technical Manual, Page: 398 / 672

Share
Download
Epson S1D13706 Technical Manual Download Page 398

Page 22

Epson Research and Development

Vancouver Design Center

S1D13706

S5U13706B00C Rev. 1.0 Evaluation Board User Manual

X31B-G-004-04

Issue Date: 01/02/23

6.6  Software Adjustable LCD Backlight Intensity Support Using PWM

The S1D13706 provides Pulse Width Modulation output on PWMOUT. PWMOUT can be 
used to control LCD panels which support PWM control of the backlight inverter. The 
PWMOUT signal is provided on the buffered LCD connector (H1).

6.7  Passive/Active LCD Panel Support

The S1D13706 directly supports:

• 4/8-bit, single monochrome passive panels.

• 4/8/16-bit single color passive panels.

• 9/12/18-bit TFT active matrix panels.

• 18-bit Sharp HR-TFT panels.

• 18-bit Epson D-TFD panels.

All the necessary signals are provided on the 40-pin LCD connector H1. For connection 
information, refer to Table 5-1: “LCD Signal Connector (H1)” on page 18.

6.7.1   Buffered LCD Connector

The buffered LCD connector (H1) provides the same LCD panel signals as those directly 
from S1D13706, but with voltage-adapting buffers selectable to 3.3V or 5.0V. Pin 32 on 
this connector provides a voltage level of 3.3V or 5.0V to the LCD panel logic (see “JP6 - 
LCD Panel Voltage” on page 14 for information on setting the panel voltage).

6.7.2   Extended LCD Connector

The S1D13706 directly supports Sharp 18-bit HR-TFT and Epson 18-bit D-TFD panels. 
The extended LCD connector (H3) provides the extra signals required to support these 
panels. The signals on this connector are also buffered from the S1D13706 and adjustable 
to 3.3V or 5.0V (see “JP6 - LCD Panel Voltage” on page 14 for details on setting the panel 
voltage).

Summary of Contents for S1D13706

































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments