Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEET
NEXT
B
RP-U420 series
Specification
(STANDARD)
48
47
7) Invalid
The state in which the command portion of codes is read in and discarded, while the parameter
portion of codes is treated as normal data.
8) Inch
A unit of length. One inch is 25.4 mm.
9) MSB
Most Significant Bit
10) LSB
Least Significant Bit
6.3 Command Descriptions
LF
[Name]
Print and line feed
[Format]
ASCII
LF
Hex
0A
Decimal
10
[Function]
Prints the data in the print buffer and feeds one line, using the current line spacing (1/6").
[Description]
This command sets the print position to the beginning of the line.
FF
[Name]
Print and feed paper to print starting position
[Format]
ASCII
FF
Hex
0C
Decimal
12
[Function]
•
When DIP switch 1-7 OFF (auto cutter installed):
Prints the data in the print buffer and feeds to the next print starting position on the
receipt and cut (one point left uncut).
•
When DIP switch 1-7 ON (manual cutter installed):
Prints the data in the print buffer and feeds to the next print starting position on the
receipt.
[Description]
•
This command is effective only in the Taiwan mode. (Refer to Table 3.3.1)
•
This command is effective only when receipt or journal is selected as the print sheet.
•
After the operation, the printer sets the print starting position to the beginning of a line.
•
The paper is not fed when the paper presents on the print starting position or when the
mark sensor detects the marked portion. The paper is fed when the paper is not
presented on the print starting position, or when the mark sensor does not detect the
marked portion.
