Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEET
NEXT
B
RP-U420 series
Specification
(STANDARD)
64
63
➀
➀
➀
➀
GS V m
➁
➁
➁
➁
GS V m n
[Name]
Feed paper to the cutting position and cut it.
[Format]
➀
ASCII
GS
V
m
Hex
1D
56
m
Decimal
29
86
m
➁
ASCII
GS
V
m
n
Hex
1D
56
m
n
Decimal
29
86
m
n
[Range]
➀
0
≤
m
≤
2, 48
≤
m
≤
50
➁
65
≤
m
≤
67
0
≤
n
≤
255
[Function]
Cuts a receipt.
•
When DIP switch 1-7 OFF (auto cutter installed),
m
specifies the paper cutting
operation as follows.
Paper cutting operation
m
when standard mode
when Taiwan mode
0, 48, 1, 49
Cut (one point left uncut)
Cut (one point left uncut).
2, 50
Cut (three points left uncut)
Cut (three points left uncut).
65, 66
Feed paper to the cutting
position, then cut (one point left
uncut).
Feed paper to the preprint black
mark position, then cut (one point
left uncut).
67
Feed paper to the cutting
position, then cut (three points
left uncut).
Feed paper to the preprint black
mark position, then cut (three
points left uncut).
•
When DIP switch 1-7 ON (manual cutter installed),
m
specifies the paper cutting
operation as follows.
Paper cutting operation
m
when standard mode
when Taiwan mode
0, 48, 1, 49
No operation
No operation
2, 50
No operation
No operation
65, 66
Only feed paper to the cutting
position.
Only feed paper to the preprint
black mark position.
67
Only feed paper to the cutting
position.
Only feed paper to the preprint
black mark position.
•
n
specifies the paper feeding amount before cutting a paper.
