Epson R1800 - Stylus Photo Color Inkjet Printer, Service Manual

Page: 105 / 234

EPSON Stylus Photo R1800/R2400 Revision B
Disassembly And Assembly Disassembly 105
4.2.6.6 Paper EJ Frame Assy.
1. Remove the Upper Housing. See Section 4.2.1.4 on page 76.
2. Remove the CD-R Unit Housing from the CD-R Tray Base by releasing the
Housing from two attaching points to the Tray Base.
3. Remove the Left Frame Support Plate.
See Step 5 and Step 6 in Section 4.2.6.4 on page 95.
4. Return the rotation position of the Right PG Cam.
5. Remove the four C.B.S. M3 x 6 screws and two C.B.P. M3 x 8 screws that
secure the Paper EJ Frame Assy.
Figure 4-83. Screws that Secure the Paper EJ Frame Assy
6. Remove the two Guide Pins on the CD-R Tray Base from the Left and
Right CD-R Release Lever Sub Assy.
7. Pull the Star Wheel Roller toward you, and remove the Paper EJ Frame
Assy from the Printer Mechanism keeping the Assy from coming in contact
with the Right CD-R Release Lever Sub Assy and the Tab on the Right
CD-R Cover.
Figure 4-84. Removing the Paper EJ Frame Assy.
Attaching Points
2
3
Tabs
2) C.B.S. 3x6
(8±1 kgf.cm)
4) C.B.P. 3x8
(8±1 kgf.cm)
4
1
Tabs
CD-R Tray Base
CD-R Unit Housing
Paper EJ Frame Assy.
C A U T I O N
When performing the following procedure, take care not to
scratch the Star Wheel.
Point of contact
Star Wheel Roller
Left CD-R Release
Lever Sub Assy. Right CD-R Release
Lever Sub Assy.
Guide
pins
Right CD-R
Cover