77
Adjusting Projector Features
Follow the instructions in these sections to use your projector's feature adjustments.
Shutting Off the Picture Temporarily
Using Picture in Picture
Projector Security Features
Using Advanced Image Adjustment Features
Saving Settings to Memory and Using Saved Settings
Saving the Lens Position and Using Saved Lens Positions
Shutting Off the Picture Temporarily
You can temporarily turn off the projected picture if you want to redirect your audience's attention during
a presentation. Any video action continues to run, however, so you cannot resume projection at the point
that you stopped it.
1.
Press the
Blank
button on the remote control to temporarily stop projection.
2.
To turn the picture back on, press the
Blank
button again.
Parent topic:
Using Picture in Picture
You can use Picture in Picture mode to view two image sources simultaneously (Pro Cinema 4050).
Note:
You can display only HDMI video sources when using Picture in Picture mode. You cannot use
Picture in Picture while projecting 3D or 4K images.
1.
Turn on the projector and switch to the HDMI image source you want to use.
Summary of Contents for Pro Cinema 4050
