Epson Pro Cinema 4050 User Manual Download Page 58

Page: 58 / 176

Turn on the video device, then turn on the projector.

Begin playback from the video device.

Note:

Make sure you set the video device to play content in 3D mode.

Slide the power switch on the 3D glasses to the

position.

Put on the 3D glasses and view the projected image. If you do not see a 3D image, pair the glasses
with the projector.

Note:

If you change the video source or you are not within range of your projector, the glasses enter

standby mode and the status light flashes green. Slide the power switch on the glasses to the

Off

position and then back to the

position to resume 3D viewing.

Pairing the 3D Glasses with the Projector
Charging the 3D Glasses
3D Viewing Range

Parent topic:

Using Basic Projector Features

Related references

Input Signal Settings - Signal Menu

Related tasks

Connecting to an HDMI Video Source

Pairing the 3D Glasses with the Projector

Pair the glasses with the projector to establish communication between them for 3D viewing.

Turn on the projector.

Summary of Contents for Pro Cinema 4050

















































































































































































Search results

Summary of Contents for Pro Cinema 4050

Reviews:

Related manuals for Pro Cinema 4050

Brands by name

Popular brands

Epson Pro Cinema 4050, User Manual

Search results

Summary of Contents for Pro Cinema 4050

Reviews:

Related manuals for Pro Cinema 4050

Brands by name

Popular brands