Epson Pro Cinema 4050 User Manual Download

Page: 56 / 176

Turning Off the Projector

Before turning off the projector, shut down any computer connected to it so you can see the computer
display during shutdown.

Note:

Turn off this product when not in use to prolong the life of the projector. Lamp life will vary

depending upon mode selected, environmental conditions, and usage. Brightness decreases over time.

Note:

When using the Blank feature, the projector lamp is still on. To turn off the lamp, turn off the

projector.

Press the power button on the projector or the

Standby

button on the remote control.

The projector displays a shutdown confirmation screen.

Press the power button on the projector or the

Standby

button on the remote control again. (To

leave it on, press any other button.)

The lamp turns off and the lens shutter closes. The projector's

Status

light flashes and then turns off.

Note:

If you unplug the projector before the

Status

light stops flashing and need to turn the projector

back on, wait until the lamp has cooled down (about 10 minutes), plug the power cord back in, and
turn the projector on again. You cannot operate the projector until it finishes cooling down.

Summary of Contents for Pro Cinema 4050

















































































































































































Search results

Summary of Contents for Pro Cinema 4050

Reviews:

Related manuals for Pro Cinema 4050

Brands by name

Popular brands

Epson Pro Cinema 4050, User Manual

Search results

Summary of Contents for Pro Cinema 4050

Reviews:

Related manuals for Pro Cinema 4050

Brands by name

Popular brands