65
Image Shape
You can project an evenly rectangular image by placing the projector directly in front of the center of the
screen and keeping it level. If you place the projector at an angle to the screen, or tilted up or down, or off
to the side, you may need to correct the image shape for the best display quality.
Correcting Image Shape With the Keystone Buttons
Parent topic:
Using Basic Projector Features
Correcting Image Shape With the Keystone Buttons
You can use the projector's keystone correction buttons to correct the shape of an image that is
unevenly rectangular on the sides.
1.
Turn on the projector and display an image.
Note:
You can display a pattern to aid in adjusting the projected image using the
Pattern
button on
the remote control.
2.
Press a keystone button on the projector's control panel.
After correction, your image is slightly smaller.
Note:
If the projector is installed out of reach, you can also correct the image shape using the
Keystone settings in the projector menus.
Parent topic:
Related references
Projector Feature Settings - Settings Menu
Resizing the Image with the Zoom Feature
You can adjust the size of the projected image using the zoom feature.
Summary of Contents for Pro Cinema 4050
