Epson PowerLite Home Cinema 3900 User Manual Download Page 149 | Manualshive

Page: 149 / 208

background image

149

Doing so may cause an unstable display and could lead to projector damage. Do not use or store the
projector where it may be exposed to sudden changes in temperature.

• Do not store the projector outside of the required temperature range of 14 to 140 °F (–10 to 60 °C) or

in direct sunlight for long periods of time. Doing so may cause damage to the case.

• Do not place anything that can become warped or damaged by heat near the exhaust vents. Do not

bring your hands or face close to the vents while projection is in progress. Do not bring your face close
to the projector while it is in use.

• Before you move the projector, make sure its power is turned off, the plug is disconnected from the

outlet, and all cables are disconnected.

• Never try to remove the lamp immediately after use because it will be extremely hot. Before removing

the lamp, turn off the power and wait at least an hour to allow the lamp to cool completely.

• Do not place the source of an open flame, such as a lit candle, on or near the projector.

• Do not block the lens during projection using a book or any other object. This could damage the

projector or cause a fire.

• Do not modify the power cord. Do not place heavy objects on top of the power cord or bend, twist, or

pull it excessively. Keep the power cord away from hot electrical appliances.

• Always attach the lens unit cap to the lens when not using the projector to prevent the lens from

becoming dirty or damaged.

Note:

The lamp(s) in this product contain mercury. Please consult your state and local regulations

regarding disposal or recycling. Do not put in the trash.

WARNING

: The cords included with this product contain chemicals, including lead, known to the State of

California to cause birth defects or other reproductive harm.

Wash hands after handling.

(This notice is

provided in accordance with Proposition 65 in Cal. Health & Safety Code § 25249.5 and following.)

Restriction of Use

Parent topic:

Restriction of Use

When this product is used for applications requiring high reliability/safety such as transportation devices
related to aviation, rail, marine, automotive; disaster prevention devices; various safety devices; or
functional/precision devices, you should use this product only after giving consideration to including fail-
safes and redundancies into your design to maintain safety and total system reliability.

«
...
147
148
149
150
151
...
»

Summary of Contents for PowerLite Home Cinema 3900

















































































































































































































Reviews:

No comments

Related manuals for PowerLite Home Cinema 3900

TECHNO LIGHT 270

Brand: Storz Pages: 42

ZH-T202SF Series

Brand: Zenith Pages: 57

RTI Nano Series

Brand: Laserworld Pages: 33

Brand: BenQ Pages: 63

Brand: Digital Projection Pages: 112

Innovate CP-AW100N

Brand: Hitachi Pages: 202

Brand: SKYTRONIC Pages: 20

Brand: Ask Proxima Pages: 2

Brand: Eiki Pages: 48

Brand: JAMO Pages: 1

XV-Z3100 - DLP Projector - HD 720p

Brand: Sharp Pages: 2

Brand: Sharp Pages: 2

Brand: Sharp Pages: 2

Brand: Sharp Pages: 28

Brand: Sharp Pages: 48

Brand: Sharp Pages: 62

XV-Z9000U - Vision - DLP Projector

Brand: Sharp Pages: 61

Brand: Sharp Pages: 62

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands