79
8.
If you want to use the Secure HTTP protocol to encrypt communication when using Web Control,
turn on the
Secure HTTP
setting and import the web server certificate to the
Web Server Cert.
setting.
9.
If available, select the
Priority Gateway
setting for your network.
10. If your network environment uses an AMX controller, turn on the
AMX Device Discovery
setting to
allow the projector to be detected.
11. If your network environment uses a Crestron RoomView controller, turn on the
Crestron RoomView
setting to allow the projector to be detected.
12. If you are using the projector with a Control 4 Simple Device Discovery Protocol (SDDP) automation
system, turn on the
Control4 SDDP
setting.
13. If you want this projector to receive broadcast messages over the network, turn on the
Message
Broadcasting
setting. Administrators can broadcast messages over the network using the Message
Broadcasting plug-in for EasyMP Monitor (Windows only).
14. When you finish selecting settings, select
Complete
and follow the on-screen instructions to save
your settings and exit the menus.
Parent topic:
Using the Projector on a Network
Controlling a Networked Projector Using a Web Browser
Once you have connected your projector to your network, you can select projector settings and control
projection using a compatible web browser. This lets you access the projector remotely.
Note:
The web setup and control features support Microsoft Internet Explorer 9.0 or later, and Safari on
networks that do not use a proxy server for connection. You cannot select all of the projector menu
settings or control all projector functions using a web browser.
Note:
If you set Standby Mode to
Communication On
in the ECO menu, you can use a web browser to
select settings and control projection even if the projector is in standby mode.
1.
Make sure the projector is turned on.
2.
Start your web browser on a computer or device connected to the network.
3.
Type the projector's IP address into the browser's address box and press the computer's
Enter
key.
You see the Web Control screen.
Summary of Contents for PowerLite Home Cinema 2040
