18
EasyMP.net Operation Guide
Setting EasyMP.net Options (EasyConfiguration)
Various network parameters and application defaults can be set using
EasyConfiguration. Click the left-hand side menu to start the setup.
Managing EasyMP.net Users
"System Management" - "User management"
To register a user, click "Create New" and set the parameters in the table
below.
To edit a registered user's data, click the "Edit" button before the user ID
you wish to edit.
Deleting a User
To delete a user, select the user and click "Delete".
"System Management" - "Access Management"
Access rights to allow or limit the access of each user to EasyMP.net can
be set using the PC browser.
Access procedure .
Registering/Editing/Deleting a User
User ID
Enter an ID to be used in EasyMP.net.
One to 20 alphanumeric characters can be entered. No
symbols are allowed.
Password
Enter a password for system logon. The password can
be 0 to 14 alphanumeric characters.
Reenter password.
Reenter the password for confirmation.
Click the required
menu.
EasyMP.net
administrator
Check this box to define the current user as the
EasyMP.net administrator. Then this user can set and
change the EasyConfiguration data without any access
restrictions.
Change the password.
This box appears during user editing. Check this box to
change the password.
Controlling Access Rights
Access to the common
folder
Specify the access right to the "EveryOne" common
folder.
Access to EasyMenu
Specify the access right to EasyMenu for projector
setup using the PC browser.
Access to EasyRemote Specify the access right to EasyRemote for control of
the projector power and sounds using the PC browser.
Summary of Contents for PowerLite 8300i with EasyMP.net module
Page 1: ......
