27
Projecting PC Images (Network Screen)
EasyMP.net Operation Guide
To use data ciphering, click "Extension".
If you do not want to use ciphering, go to Step 5.
Check the "Use encrypted" box and click "OK".
Click "Connect".
Enter the projector keyword in the "Keyword" field
and click "OK". The keyword is shown on the
projector's standby screen.
If the projector keyword is not set to "Use" in
EasyConfiguration (
), the keyword input screen is not
displayed.
The projector will be connected to the PC via the network, and
the screen of the PC will be projected.
When you control a projector from a PC, use Remote Control
or the on-screen toolbar. (
If the connected projector name is not listed on the Projector Selection
screen of EMP NS Connection, select the "Connection with IP setupC
mode and specify the
as follows.
PROCEDURE
Select "Start" - "Program" (or "All Programs") -
"EPSON Projector" - "EMP NS Connection" in this
order to start EMP NS Connection.
3
4
5
6
If the Connected Projector is Not Displayed
TIP
The projector keyword is changed when you turn the projector
power off and turn it on again or when you remove the wireless LAN
card from the slot and insert it again. When you connect a projector
to a PC, always check the projector keyword on the connection
standby screen of the projector and enter it in the "Keyword" field.
You cannot use the previous keyword to connect the projector to a
PC
When the Network Screen is used, the
button of remote control
cannot be used.
When you take over from a previous presenter and want to use a
different PC, restart EMP NS Connection from the new PC. The
current connection will be released and the projector will be
connected to the new PC automatically.
1
Summary of Contents for PowerLite 8300i with EasyMP.net module
Page 1: ......
