Epson LabelWorks Printable Ribbon Kit, User Manual

Page: 35 / 40

Notices | 33
■
Place the AC adapter and power cord to avoid
abrasions, cuts, fraying, crimping, and kinking. Do
not place heavy objects on top of the AC adapter or
power cord.
■
Make sure the AC adapter has sufficient ventilation
so that it doesn’t overheat and become damaged.
Do not crowd it with too many other adapters or
cords.
■
Do not forcibly bend or twist the power cord.
■
Do not place the AC adapter or power cord near a
heater.
■
To avoid fire or electric shock, do not use a
damaged AC adapter or power cord.
■
Turn off the product before unplugging the AC
adapter. Otherwise, it may not function properly or
may become damaged.
Tape cartridges
■
Use only compatible LC tape cartridges.
■
To avoid damage, do not drop or disassemble tape
cartridges.
■
Feed the tape using the + buttons. Do not
forcibly pull out the tape. Otherwise, you may
damage the tape cartridge.
■
Do not try to print with an empty tape cartridge;
this may overheat the print head and damage the
product.
Note: Tape cartridges contain ink ribbons. Make sure
to follow local ink disposal regulations.
About printed labels
Attached labels and adhesive are affected by the type of
surface and by environmental conditions such as
humidity and heat. Labels may peel off, curl, or fade;
printed characters may fade; color may be left behind
after removing the label; adhesive may become stuck to
the attached surface.
Epson is not responsible for any damage or loss caused
by labels or adhesive.
FCC Compliance Statement
For United States Users
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment