Epson LabelWorks Printable Ribbon Kit, User Manual

Page: 33 / 40

Notices | 31
Notices
Safety instructions
Before using your product, read the following safety
instructions to make sure you use it safely and
effectively.
■
Always use the product as instructed in the manual.
Otherwise, damage or injury may occur.
■
Do not subject the product to any strong force or
shock such as dropping, hitting, or standing on the
product.
■
Do not spill liquid on the product or use the
product with wet hands.
■
Do not open any covers on the product other than
the rear cover.
■
Do not touch the print head.
■
Turn the product off, unplug the AC adapter and
remove the batteries, and refer servicing to
qualified service personnel under the following
conditions: if liquid or foreign objects get inside the
product; if the product does not operate normally
or exhibits a distinct change in performance.
Continuing to use the product may result in
damage or injury.
■
To avoid injury, keep your fingers away from the
label exit slot when printing or using the cutter.
■
Avoid locations that are subject to rapid changes in
heat or humidity, shocks or vibrations, or dust.
■
Do not place or store the product in the following
locations: outdoors or in direct sunlight; near
sources of excessive heat, humidity, shocks,
vibrations, or dust; where it may get wet or be
exposed to excessive humidity; on an unstable
place such as a shaky or inclined surface; near
potential sources of electromagnetic interference
such as loudspeakers or the base units of cordless
telephones.
■
The product and product manuals may come
packaged in plastic bags. Keep plastic bags away
from small children to avoid any risk of suffocation.
■
If you will not be using the product for a long
period, unplug the power cord and remove the
batteries.
■
Before cleaning, unplug the power cord and
remove the batteries. Use only a dry, soft cloth to
clean the product; do not use liquid or chemical
cleaners.