Cable and Wire Management
|
21
Flag labels
Flag labels provide a large surface for
multiple lines of text. A vertical line marks
the center of the flag to help wrap the cable
evenly.
1. Press .
2. Press
to select a flag type (
Flag: Hori.
,
Flag: Vert.
, or
Flag: Edge
), then press
.
3. Press
to select the length, then press
.
4. Enter your text, then press
.
Flag label tips
■
When labeling cables with a flag label,
set a specific length for the label. If you
use the “Auto” feature, the text will be too
close to the center of the label and you
will not have enough extra tape to wrap
around the cord.
■
When adhering the flag label to the
cable, loop the label around the cord
loosely and stick the ends of the label
together, then move inwards toward the
cable. This makes it easier to align the
ends.
■
Add an extra inch or more to your flag
label to allow enough blank label to wrap
around the cord.
■
The starting and ending half-inch of
empty label cannot be reduced. To
remove them, trim the excess label.
■
If space is limited, use narrower tapes
(such as 9 mm and 6 mm widths).
Flag: Hori.
Flag: Vert.
Flag: Edge
cable.book Page 21 Wednesday, May 22, 2013 3:25 PM
