18
|
Customizing Your Labels
Adding space between characters
You can add extra space between the letters,
numbers, and symbols on your label.
1. Press .
2. Press
until you see
Char. spacing
,
then press
to select it.
3. Press
to change from
Narrow
to
Wide
, then press
.
Selecting narrow characters
You can change from normal characters and
symbols to narrow ones.
1. Press .
2. Press
until you see
Narrow
, then
press
to select it.
3. Press
again to select
Narrow
.
Increasing print density
You can make the print on your labels darker
if necessary.
1. When the power is off, press
+
.
Print density
appears on the display.
2. Press .
3. Press
to adjust the print density, then
press
to select the density you want.
Note:
The default value (0) is recommended.
Adding punctuation
In addition to the basic punctuation marks
shown on the keyboard, you can select from
two more groups of punctuation marks, as
shown below:
; ( ) < > [ ] { }
Group 1
Group 2
cable.book Page 18 Wednesday, May 22, 2013 3:25 PM
