![Epson FX-1180 - Impact Printer Service Manual Download Page 34](http://html.mh-extra.com/html/epson/fx-1180-impact-printer/fx-1180-impact-printer_service-manual_109231034.webp)
Product Description
EPSON FX-880/FX-1180 Service Manual
1-23
Paper handling when in the tear-off mode
If you press the Pause button with the printer off-line, the printer feeds the paper back to the TOF
position for the next page and brings the printer back on-line.
If you press the Pause button with the printer on-line, the printer feeds the paper back to the TOF
position for the next page and takes the printer off-line.
Pressing the LF/FF button feeds the paper back to the TOF position for the next page and executes a
line feed.
Pressing the Load/Eject button feeds the paper back to the TOF position for the next page and ejects
paper backward.
If the printer is turned off while in the tear-off mode, the tear-off position is saved, and paper is fed
back to the TOF position for the next page when you turn the printer on again.
Changing the Default Settings
Default settings are special settings stored in the printer’s EEPROM which remain active even after
turning off the printer. The FX-880 and FX-1180 both have two default setting modes. You can change
different printer settings in each of these modes.
When you enter the default setting mode, the printer prints out instructions for changing the settings, as
well as a menu of options. In general, you use the Tear Off/Bin button to select from the printed menu the
setting you wish to change, and the Load/Eject button to change the value of the setting. In addition to
these buttons, you use four LEDs: the Font and TearOff/Bin LEDs to follow your menu selections, and the
Pause and Paper Out LEDs to see the current settings.
Default Settings (Mode 1)
Refer to the following flowchart and its accompanying table to adjust the default settings in mode 1.
START
The language selection menu
prints.
Change the language?
YES
NO
The default settings menu and
selection guide are printed.
Turn the printer off to save the
settings.
END
Push the Tear off/Bin switch
to select the default setting
you wish to change.
Push the Load /Eject switch
to change the setting's value.
Hold down the Tear off/Bin
switch and turn on the printer.
Push the Load/Eject switch to
select a different language.
Push the Tear off/Bin switch.
Finished?
NO
YES
Figure 1-9. Changing Default Settings (Mode 1)
Summary of Contents for FX-1180 - Impact Printer
