Solving Problems for Advanced Security
Restoring the Security Settings
When you establish a highly secure environment such as IPsec/IP Filtering, you may not be able to communicate
with devices because of incorrect settings or trouble with the device or server. In this case, restore the security
settings in order to make settings for the device again or to allow you temporary use.
Disabling the Security Function Using the Control Panel
You can disable IPsec/IP Filtering using Web Config.
1.
Access Web Config and select the
Network Security
tab >
IPsec/IP Filtering
>
Basic
.
2.
Disable the
IPsec/IP Filtering
.
Problems Using Network Security Features
Forgot a Pre–shared Key
Re-configure a pre-shared key.
To change the key, access Web Config and select the
Network Security
tab >
IPsec/IP Filtering
>
Basic
>
Default
Policy
or
Group Policy
.
When you change the pre-shared key, configure the pre-shared key for computers.
Related Information
&
“Running Web Config on a Web Browser” on page 26
&
“Encrypted Communication Using IPsec/IP Filtering” on page 211
Cannot Communicate with IPsec Communication
Specify the algorithm that the scanner or the computer does not support.
The scanner supports the following algorithms. Check the settings of the computer.
Security Methods
Algorithms
IKE encryption algorithm
AES-CBC-128, AES-CBC-192, AES-CBC-256, AES-GCM-128*, AES-GCM-192*,
AES-GCM-256*, 3DES
IKE authentication algorithm
SHA-1, SHA-256, SHA-384, SHA-512, MD5
IKE key exchange algorithm
DH Group1, DH Group2, DH Group5, DH Group14, DH Group15, DH
Group16, DH Group17, DH Group18, DH Group19, DH Group20, DH
Group21, DH Group22, DH Group23, DH Group24, DH Group25, DH
Group26, DH Group27*, DH Group28*, DH Group29*, DH Group30*
>
>
Solving Problems for Advanced Security
223