F
Stop button
❏
Cancels scanning.
❏
Finishes Automatic Feeding Mode.
❏
Cancels Wi-Fi settings by push button setup (WPS).
❏
Press this to release the error when a network connection
error occurs.
❏
Cancels a firmware update over a network connection.
G
Start button
❏
Starts scanning.
❏
Press this when cleaning the inside of the scanner.
H
NFC tag
Hold a smart device over this tag to scan directly from the
smart device.
Additional functions are available with different combinations of buttons.
+
Hold down the
and
buttons for more than three seconds to start PIN Code Setup
(WPS). See the chapter “Network Settings” for more details.
+
Turn on the scanner while holding down the
button to restore the default network
settings.
Related Information
&
&
“Placing Plastic Cards” on page 31
&
“Placing Laminated Cards” on page 34
&
“Placing Envelopes” on page 46
&
“Cleaning Inside the Scanner” on page 73
&
“Scanning from Smart Devices Using NFC Tag” on page 65
Lights
A
AP mode light
Indicates that the scanner is connected wirelessly in AP mode.
User's Guide
Scanner Basics
13