Epson Equity LT-286e, User Manual

Page: 114 / 161

Appendix B
Installing Options
This appendix describes how you install optional devices on
your LT-286e. You can install an external monitor, an external
diskette drive, an internal modem, an internal
1MB
memory
card, and an external keyboard. You can also install a
IBM AT-compatible expansion card and a math coprocessor.
Connecting an External Color Monitor
If you plan to use an external monitor with your Equity
LT-286e, follow the instructions below to connect it to the
computer:
1.
Be sure both the computer and monitor (as well as any
other peripheral devices) are turned off.
2. Turn the computer upside down and set the CRT/LCD slide
switch to CRT. This slide switch setting lets the computer
know you will be using a monitor instead of the LCD
screen. (See “Setting the Slide Switches” in Appendix A
for details.)
3. Turn the computer right side up with the front facing you.
4. Place your monitor near the Equity LT-286e.
5. If necessary, connect the monitor cable to the monitor.
(Some monitors come with permanently attached cables.)
6. Lower the interface cover on the right side of the computer.