Epson EQUITY II+, User Manual, Page: 88 / 151

The OPERATION MENU
After the power-on self test completes successfully, the diagnostics pro-
grams start. Depending on the exact system you purchased, these programs
and certain screen displays may vary. A typical OPERATION MENU looks
like this:
OPERATION MENU
1 - Setup
2 -
Format hard disk
3
- Format diskette
4 - System diagnostics
5
- Prepare hard disk for moving
0 - Exit to DOS for more utilities
Enter selection number:
To select one of the diagnostics programs, press a number from 1 to 5
and press
Enter.
Option 3, Format diskette, is included on the OPERATlON MENU for
convenience only. This option lets you format diskettes for use by the System
diagnostics tests without exiting from the diagnostics programs.
To use the other utility programs on the reference diskette, select 0 from
the OPERATION MENU. Then start the utility from the MS-DOS
prompt.
Option 0 exits the diagnostics programs in one of the following ways:
l
If you have not run a diagnostics program, you see this selection on the
OPERATION MENU:
0 - Exit to DOS for more utilities
In this case, when you press 9 and
Enter,
you see the MS-DOS prompt.
Diagnostics
Intro-3