Epson EPL-N3000, Reference Manual

Page: 310 / 443

Troubleshooting
297
9
9
9
9
9
9
9
9
9
9
9
9
Face-up Path Selected
Even though 2-sided printing has started or the Stacker is set as
the output tray in the printer driver, the paper path lever is set to
the face-up position. Set the paper path lever to the face-down
position, or press the
N
Start/Stop button or the Cancel Job
button.
Form Data Canceled
Unable to store form overlay data on the printer’s optional Hard
Disk Drive. Either the drive is full, or the maximum number of
form overlay files has been reached. Delete any form overlay files
you no longer need, then try storing the new overlay again.
To clear this error, select
Clear Warning
from the control panel’s
Reset menu. For instruction about accessing the control panel
menus, see “How to access the control panel menus” on page 339.
Form Feed
The printer is ejecting paper due to a user request. This message
appears when pressing the
N
Start/Stop button once to make the
printer offline, and then holding down the
N
Start/Stop button
for more than 2 seconds in order not to receive form feed
command.
Formatting HDD
The HDD is being formatted.
Hard Disk Full
The optional Hard Disk Drive is full and you cannot save any
data. Delete the unnecessary data from the Hard Disk Drive. To
clear this error, select
Clear Warning
from the control panel’s
Reset menu. For instruction about accessing the control panel
menus, see “How to access the control panel menus” on page 339.