Epson EPL-N3000, Reference Manual

Page: 230 / 443

Installing Options
217
7
7
7
7
7
7
7
7
7
7
7
7
Formatting the Hard Disk Drive
To format the Hard Disk Drive, follow the instructions below.
1. Make sure the printer is off and all interface cables are
disconnected.
2. Hold down the button while you turn on the printer.
3. When you see the message
Support Mode
on the LCD panel,
select
HDD Format
in the support menu.
Note:
❏
After formatting the Hard Disk Drive, the printer will
automatically reboot.
❏
When you want to erase only the fonts installed from the Adobe
PostScript 3 (PS3), follow steps 1 through 3 above. Select
PS3 HDD
Init
.
❏
Other fonts installed from PS3 will also be erased.
❏
When installing a Hard Disk Drive from other products, format it
with this function.
Interface Cards
Your printer comes with a Type B interface slot. Various optional
interface cards are available to expand your printer’s interface
options.
Follow these steps to install an optional interface card.
c
Caution:
Before you install the interface card, be sure to discharge any
static electricity by touching a grounded piece of metal.
Otherwise, you may damage static-sensitive components.