Epson EPL-N2000, Service Manual

Page: 58 / 188

1.4.4.3 Warning Messages
If any of the following warning errors occurs, it is displayed on the LCD. The printing process itself
is not affected by any of the warning messages, which is soon replaced by a
Ready message.
Table 1-22. Warning Messages
Warning Messages and Descriptions
Image Optimum
Status
The printer could not print at the density selected, due to lack of memory, and it
simplified the print image.
LED
On Line
,
Continue
,
Form Feed Keeps the same status as before.
Measure
1. Clear the warning message by pressing the Continue button.
2. Reset the printer or perform warm boot to discontinue data processing.
Toner Low
Status
Toner left has dropped to the specific amount. It’s detected by the toner
sensor in the engine.
LED
On Line
,
Continue
,
Form Feed Keeps the same status as before.
Measure
1. Press the Continue button to clear the warning.
2. Replace the toner cartridge with a new one.
Card Battery Low
Status
A backup battery in a PCMCIA card is low.
LED
On Line , Continue , Form Feed
Keeps the same status as before.
Measure
Replace the backup battery with a new one.
Check Paper Size
Status
[Size Ignore = OFF in Config menu]
This warning is given when the size of the paper loaded and the selected page
size do not match. When using MP tray, the value for MP Tray Size in the Tray
Size SelecType menu is set to the Page Size, if this message does not appear on
the LCD. The printer, however, does not always detect size differences when a
particular size of paper is loaded.
LED
On Line , Continue , Form Feed Keeps the same status as before.
Measure
1. Press the Continue button to clear the warning.
2. Reset the printer or perform warm boot.
* When this message is displayed, printing occasionally results in a size of
paper that was not specified.
Product Description EPL-N2000 Service Manual
1-46 Rev. A