Epson EPL-N2000, Service Manual

Page: 55 / 188

Table 1-21. Error Messages (Continued)
Error Messages and Descriptions
Mem Overflow
Measure
[SelecType: Auto Cont = OFF in the Config menu]
The error is cleared by using any of the following methods:
1.
Press the Continue button. Results vary by case, as described below.
If the error occurred on the first side of a duplex page, the paper is
ejected leaving the reverse side blank. Data for the reverse side is
printed on the reverse side of the next sheet.
If the error is caused by the lack of image buffer memory, the printer
prints only the data already processed.
If the error occurred during writing of data for fonts or macros, the printer
continues the current task ignoring the data written when the error
occurred.
2. Reset the printer or perform warm boot.
[SelecType: Auto Cont = ON in the Config menu]
3.
The error is automatically cleared after a specific amount of time.
4. Add more memory.
5. This error can be caused when the memory used for fonts is too large. In
such a case, turn off the printer and remove one of the above devices .
Duplex Mem Overflow
Status
In duplex printing mode, there was not enough memory left for the data on the
reverse side of the sheet. The paper was ejected after the first side was printed.
Then an error message was indicated.
LED
On Line OFF
Continue
Flashing
Form Feed
Keeps the same status as before.
Measure
[SelecType: Auto Cont = OFF in the Config menu]
1.
Press the Continue button to resume printing of data for the reverse side
on the next sheet.
2. Reset the printer or perform warm boot.
[SelecType: Auto Cont = ON in the Config menu]
3.
The printer resumes printing automatically after a specific amount of time.
Data for the reverse side is printed on the reverse side of the next sheet.
Illegal Aux I/F Card
Status
The optional I/F card inserted in theType-B slot cannot be used with this printer.
LED
On Line
OFF
Continue
OFF
Form Feed Keeps the same status as before.
Measure
Turn the printer off, remove the optional card, and then turn the printer back on.
EPL-N2000 Service Manual Product Description
Rev. A 1-43