Epson EPL-N2000, Service Manual

Page: 53 / 188

Table 1-21. Error Messages (Continued)
Error Messages and Descriptions
Paper Out aaaaa bbbbb*
1
Measure
1. When "aaaa" is LC1 or LC2:
The error is cleared by inserting the "bbbb" size paper into cassette
"aaaa".
2. When "aaaa" is MP:
The error is cleared by inserting the "bbbb" size paper in MP tray.
If the warning error "Check Paper Size" does not appear after printing,
it means that the Paper Size for MP tray in the SelecType menu has
been changed automatically to "bbbb."
Toner Out
Staus
Toner is nearly out, which may cause print quality to deteriorate. If the you
press the button, the printer outputs another sheet, but afterward the same
message returns on the panel.
LED
On Line OFF
Continue OFF
Form Feed Keeps the same status as before.
Measure
1. Replace the toner cartridge with a new one.
2. Press the Continue button for a temporary recovery.
Paper Set aaaa bbbb
Staus
[SelecType: Size Ignore = OFF]
Paper loaded in paper source "aaaa" does not match the selected page size.
LED
On Line
OFF: Size Ignore = OFF
ON: Size Ignore = ON
Continue
Flashing
Form Feed
Keeps the same status as before.
Measure
[SelecType: Auto Cont = OFF in the Config menu]
The error is cleared with either of the following methods:
1.
Press the
Continue
button after inserting the "bbbb"size paper into the
"aaaa" paper source. Then the printer starts feeding "bbbb" size paper
from the "aaaa" paper source.
2. Press the Continue button without replacing the paper. If there is more
than 2 pages of data remaining, the printer discontinues the job after
printing 1 page and the same error occurs.
[SelecType: Auto Cont = ON in the Config menu]
The error is automatically cleared without replacing paper after a set
period of time. Then the printer resumes feeding paper from the "aaaa"
paper source. In this case, when there is data for 2 pages or more, the printer
indicates the same error message before each page.
EPL-N2000 Service Manual Product Description
Rev. A 1-41