Epson EPL-6200, Service Manual

Page: 61 / 204

EPSON EPL-6200/EPL-6200L Revision A
Product Description Status Sheet 61
1.11 Status Sheet
<EPL-6200>
A sample of the Status Sheet is shown at right.
The following information is printed at bottom left in the order of 1) to 8):
1). IA followed by firmware version shown in the DDYM format
For M (month), “A” represents October, “B” November and “C” December
2). Negotiation result of IEEE1284
e: ECP, n: Nibble, or none: Compatibility or not connected
3). Device type of code ROM
*: Flash or none: Mask
4). 6-digit number indicating the number of times a jam has occurred
JXXXXXX
5). The number of times the Developer Cartridge (toner cartridge) was replaced:
“ICXXX YYY”
The number of digits depends on the replacement count.
X: The number of times the genuine Developer Cartridge (toner cartridge)
was replaced with a new one. Counting is continued until a maximum of
999 new cartridges are installed. The Developer Cartridge that has been
installed in any printer once is not regarded to be a new one even if it has
never been used for printing.
Y: The number of times the non-genuine Developer Cartridge was replaced
with a new one.
6). USB ID (24PXXXXXXXXXXXXXXX)
7). The latest connection status of USB communicate mode
F: FS, or none: no connection with USB
8). 10-digit number headed by MC, representing the Mechanical Controller
version of the engine